N64RGB Upgrade Kit with Deblur by Tim Worthington
 
Kit includes solder, cable harness and connector, rainbow ribbon cable, hotkeys sticker.
 
Option to add good quality shielded scart, the mod board requires an ntsc type scart whether you console is PAL or NTSC.
 
I have premodded N64's here
 
Send in Service install service is £40, email for details, david@oldskoolconsoles.com
 
The best RGB upgrade kit available for the N64
 
Official UK / EU distributor for Etim
 
Official Description:
 
N64RGB board. Hardware version 4.
Solder in board which adds RGB video support to the Nintendo 64 console.
 
- Compatible with all models of Nintendo 64, new or old, PAL or NTSC.
- Works with all Super Nintendo and Gamecube RGB cables as well as RAD2X and HD Retrovision cables.
- Outputs RGB only.
- Resistor video DAC with regulated power supply for low noise.
- De-blur feature sharpens the video signal.
-De-blur feature can be toggled with an external switch or enabled via a controller button combination.
-In game reset, activiated via a controller button combination.
-LED data monitor makes it easier to troubleshoot faulty installations.
The board is supplied with a board to board cable (150mm long), a pair of 1.25mm pitch connectors, and a fine pitch DAC adapter. For a typical installation, one connector is soldered to the N64RGB board and the other to the video DAC chip's pins or the fine pitch DAC adapter if required.
Some of the later models of Nintendo 64 have a fine pitch DAC chip (MAV-NUS or AVDC-NUS). This requires an extra adapter sold separately.
 
As Featured on Nintendo Life!
 
Compatible with all models and revisions of N64 hardware, PAL and NTSC
 
Installation Instructions
 
Additional Notes:
 
Hotkeys:
 
- Enable/Disable deblur: Gives Games a Sharper Pixel Look
- Press Z + Start + R + C-le/C-Ri

- Short and Long Reset Ideal for accessing Flash cart Menu
- Z + Start + R + A + B
 
For Controller Toggle options wire up:
 
CTRL -- PIF pin 16
RST -- PIF pin 27
SW is the optional de-blur switch.
 
Short it to ground to make de-blur on by default.
 
I have fine pitch flex adapter, this is mostly for ntsc models which have the avdc or man-nus dac chip.